ITA Eng

MK4duo - Firmware configurator tool for Firmware Version 4.4.0 (02-12-2019)

Introduction

Configurator tools for MK4duo firmware.

It is a welcome gift for your continued support of the site and the Firmware. Donate quick and easy via PayPal. Thank you.

If you want, choice any printer for load pre configured table and press button select.


Legend

I am a new option!


Value saved in EEPROM!


Upload old configuration

If you have already made a configuration you can upload the file Configuration_Overall.h

Attention! Only Configuration_Overall.h file generated by this configuration tool can be uploaded!

General

[ms, 0 = disabled]
[second, 0 = disabled]
[mm]
Tool head gets raised that distance before switching tools.

Temperature

[°C]
[255 = full current]
[0 = no current]
[255 = full current]
[255 = full current]
[0 = no current]
[255 = full current]
[255 = full current]
[0 = no current]
[255 = full current]
[255 = full current]
[0 = no current]
[255 = full current]
[C°]
[C°]
[ms]
[C°]
[ms]
[C°]
[ms]
[C°]
[ms]
[Ohms]
[Ohms]

Thermal runaway protection

[S]
[C°]
[S]
[C°]
[S]
[C°]
[S]
[C°]
[S]
[C°]

Adaptive Fan Speed

HOTEND 0

[C°]
[C°]
[%]

HOTEND 1

[C°]
[C°]
[%]
X distance from the Hotend 0
Y distance from the Hotend 0
Z distance from the Hotend 0

HOTEND 2

[C°]
[C°]
[%]
X distance from the Hotend 0
Y distance from the Hotend 0
Z distance from the Hotend 0

HOTEND 3

[C°]
[C°]
[%]
X distance from the Hotend 0
Y distance from the Hotend 0
Z distance from the Hotend 0

HOTEND 4

[C°]
[C°]
[%]
X distance from the Hotend 0
Y distance from the Hotend 0
Z distance from the Hotend 0

HOTEND 5

[C°]
[C°]
[%]
X distance from the Hotend 0
Y distance from the Hotend 0
Z distance from the Hotend 0

HOT BED 0

[C°]
[C°]

HOT BED 1

HOT BED 2

HOT BED 3

HOT CHAMBER 0

[C°]
[C°]

HOT CHAMBER 1

HOT CHAMBER 2

HOT CHAMBER 3

WATER COOLER

[C°]
[C°]

Cartesian

Type of Z probe Endstop (Z Servo Probe can be defined in function section)

Probe Manually
Probe Servo
Probe Sled
Probe Fix Mounted (Eg. inductive or Pibot)
Probe BLTOUCH (ONLY ORIGINAL BLTOUCH - for clone use Z Probe Servo)
Probe SENSORLESS (Require TMC2130 sensorless)

Dedicated Z PROBE Endstop PIN

BLTOUCH V3

Z Probe Repeatability test

LCD BED LEVELING


Z SAFE HOMING

X & Y points for Z safe homing

[mm]
[mm]

Hysteresis Feature

[mm]
[mm]
[mm]

Endstop Interrupts Feature

PROBE offset and speed

[mm] Only integer - X offset: -left [of the nozzle] +right
[mm] Only integer - Y offset: -front [of the nozzle] +behind
[mm] Only negative number - Z offset: -below [of the nozzle] (always negative!)

[mm/min]

[mm/min]

[mm/min]

[mm]

[mm] How much the nozzle will be raised when travelling from between next probing points ATTENTION!!!

[mm]

[mm] max 0

Bed Level

Mesh Bed Leveling (MBL)

MBL, ABL Linear or Bilinear, UBL

[mm]

Grid for MBL, ABL Linear or Bilinear, UBL


Dimensions

[mm]
[mm]
[mm]
[mm]
[mm]
[mm]

Stepper

[mm/s]
[mm/s]
[mm/s]
[mm/s2]
[mm/s2]

X axis stepper driver

Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only!
Only SPI driver!
[mA] Programmable driver only!
[steps per mm]
[mm/s]
[mm/s2]
[mm/s]
[mm/s]
[mm]
Divides the Homing Feedrate
X dual STEPPER Drivers
X dual Carriage

Y axis stepper driver

Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only!
Only SPI driver!
[mA] Programmable driver only!
[steps per mm]
[mm/s]
[mm/s2]
[mm/s]
[mm/s]
[mm]
Divides the Homing Feedrate

Z axis stepper driver

Only SPI driver!
Only SPI driver!
Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only!
[mA] Programmable driver only!
[steps per mm]
[mm/s]
[mm/s2]
[mm/s]
[mm/s]
[mm]
Divides the Homing Feedrate
[mm]

Core

Type of Z probe Endstop (Z Servo Probe can be defined in function section)

Z probe Manually
Z Probe Servo
Z probe Sled
Z probe Fix Mounted (Eg. inductive or Pibot)
Z probe BLTOUCH (ONLY ORIGINAL BLTOUCH - for clone use Z Probe Servo)
Probe SENSORLESS (Require TMC213 sensorless)

Dedicated Z PROBE Endstop PIN

BLTOUCH V3

Z Probe Repeatability test

LCD BED LEVELING


Z SAFE HOMING

X & Y points for Z safe homing

[mm]
[mm]

PROBE offset and speed

[mm] Only integer - X offset: -left [of the nozzle] +right
[mm] Only integer - Y offset: -front [of the nozzle] +behind
[mm] Only negative number - Z offset: -below [of the nozzle] (always negative!)

[mm/min]

[mm/min]

[mm/min]

[mm]

[mm] How much the nozzle will be raised when travelling from between next probing points ATTENTION!!!

[mm]

[mm] max 0

Bed Level

Mesh Bed Leveling (MBL)

MBL, ABL LINEAR or BILINEAR, UBL

[mm]

Grid for MBL, ABL Linear or Bilinear, UBL


Dimensions

[mm]
[mm]
[mm]
[mm]
[mm]
[mm]

Stepper

[mm/s]
[mm/s]
[mm/s]
[mm/s2]
[mm/s2]

X axis stepper driver

Same for Y stepper!
Same for Z stepper!
Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only! Same for Y stepper!
[1,2,4,8,16,32,64,128] Programmable driver only! Same for Z stepper!
[mA] Programmable driver only! Same for Y stepper!
[mA] Programmable driver only! Same for Z stepper!
[mA] Programmable driver only!
[steps per mm] Same for Y stepper!
[steps per mm] Same for Z stepper!
[steps per mm]
[mm/s] Same for Y stepper!
[mm/s] Same for Z stepper!
[mm/s]
[mm/s2] Same for Y stepper!
[mm/s2] Same for Z stepper!
[mm/s2]
[mm/s] Same for Y stepper!
[mm/s] Same for Z stepper!
[mm/s]
[mm/s] Same for Y stepper!
[mm/s] Same for Z stepper!
[mm/s]
[mm]
Divides the Homing Feedrate

Y axis stepper driver

Same for Z stepper!
Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only! Same for Z stepper!
[mA] Programmable driver only!
[mA] Programmable driver only! Same for Z stepper!
[steps per mm]
[steps per mm] Same for Z stepper!
[mm/s]
[mm/s] Same for Z stepper!
[mm/s2]
[mm/s2] Same for Z stepper!
[mm/s]
[mm/s] Same for Z stepper!
[mm/s]
[mm/s] Same for Z stepper!
[mm]
Divides the Homing Feedrate

Z axis stepper driver

Only SPI driver!
Only SPI driver!
Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only!
[mA] Programmable driver only!
[steps per mm]
[mm/s]
[mm/s2]
[mm/s]
[mm/s]
[mm]
Divides the Homing Feedrate
[mm/s]

Delta

Delta settings

[mm]
[mm]
[mm]
[mm]
[mm]
[mm]

Tower Adjustment

[mm]
[mm]
[mm]
[deg]
[deg]
[deg]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]

Stepper

[mm/s]
[mm/s2]
[mm/s2]

A axis stepper driver

Same for B and C stepper!
Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only! Same for B and C stepper!
[mA] Programmable driver only! Same for B and C stepper!
[steps per mm] Same for B and C stepper!
[mm/s] Same for B and C stepper!
[mm/s2] Same for B and C stepper!
[mm/s] Same for B and C stepper!
[mm/s] Same for B and C stepper!
[mm] Same for B and C stepper!
Divides the Homing Feedrate Same for B and C stepper!
Deltas always home to max!

B axis stepper driver

Only SPI driver!
Deltas always home to max!

C axis stepper driver

Only SPI driver!
Deltas always home to max!

Delta Feature


Auto Bed Level and Autocalibration


MBL, ABL Linear or Bilinear, UBL

[mm]

Type of Z probe Endstop (Z Servo Probe can be defined in function section)

Z probe Manually
Z Probe Servo
Z probe Fix Mounted (Eg. inductive or Pibot)
Z probe Allen Key
Z probe BLTOUCH (ONLY ORIGINAL BLTOUCH - for clone use Zprobe Servo)
Probe SENSORLESS (Require TMC213 sensorless)

BLTOUCH V3


LCD BED LEVELING



[mm] min valor 0.01
[n] Grid n X n

[mm/min]
[mm/min]
[mm/min]
N repetitions probe for median result

[mm]
[mm] How much the nozzle will be raised when travelling from between next probing points ATTENTION!!!
[mm]
[mm] max 0

[mm] Only integer - X offset: -left [of the nozzle] +right
[mm] Only integer - Y offset: -front [of the nozzle] +behind
[mm] Only negative number - Z offset: -below [of the nozzle] (always negative!)


Z probe deploy & retract

[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]

Advanced

[mm] - Distance from real junction edge
[µs] Needed for gantry systems and DUE boards.
[Hz] The maximum stepping rate.
[ns] The direction stepper Delay.

Extruders

E0 axis stepper driver

Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only!
[mA] Programmable driver only!
[steps per mm]
[mm/s]
[mm/s]
[mm/s2]
[mm/s2]
[mm/s]

E1 axis stepper driver

Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only!
[mA] Programmable driver only!
[steps per mm]
[mm/s]
[mm/s2]
[mm/s2]
[mm/s]

E2 axis stepper driver

Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only!
[mA] Programmable driver only!
[steps per mm]
[mm/s]
[mm/s2]
[mm/s2]
[mm/s]

E3 axis stepper driver

Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only!
[mA] Programmable driver only!
[steps per mm]
[mm/s]
[mm/s2]
[mm/s2]
[mm/s]

E4 axis stepper driver

Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only!
[mA] Programmable driver only!
[steps per mm]
[mm/s]
[mm/s2]
[mm/s2]
[mm/s]

E5 axis stepper driver

Only SPI driver!
[1,2,4,8,16,32,64,128] Programmable driver only!
[mA] Programmable driver only!
[steps per mm]
[mm/s]
[mm/s2]
[mm/s2]
[mm/s]

Features

SD or USB flash drive support

No support
SD support

SPI SPEED, use slower SD transfer mode (This may be required to resolve "volume init" errors)

SD_FULL_SPEED
SD_HALF_SPEED
SD_QUARTER_SPEED
SD_EIGHTH_SPEED
SD_SIXTEENTH_SPEED
Normally EEPROM
Emulation EEPROM on SD
Emulation EEPROM on Flash

Servos

[-1 not used, index start 0]
[°]
[°]
[ms]
[mm]
[mm]
[mm]

A triggered door will prevent new commands from serial or sd card.

[mm/s]
[mm/s]
[mm]
[mm]
[mm/s]
[mm/s]
[mm]
[mm/s]
[mm]
[mm/s]
[mm]
[mm/s]
[mm]
[mm/s]
[mm]
[mm/s]
[mm]
[µs]
[mm]
[second]
[minute]
[beep]

FAN

[Hz]
[0-255] 0 disabled
[1-255]
[ms] 0 disabled
[C°]
[0-255]
[0-255]
[S]
[0-255]
[0-255]



LCD

Amount of time (s) to show the bar
Amount of time (s) to show the status message
Amount of time (s) to retain the status message (0=forever)

Preheat 1

[C°]
[C°]
Insert Value between 0 and 255 (255 full speed)

Preheat 2

[C°]
[C°]
Insert Value between 0 and 255 (255 full speed)

Preheat 3

[C°]
[C°]
Insert Value between 0 and 255 (255 full speed)

Download Firmware MK4duo

It is a welcome gift for your continued support of the site and the Firmware. Donate quick and easy via PayPal. Thank you.

{{responseMessage}}


MarlinKimbra.zip

Attention! Please Enable Pop-ups in Your Browser for download file!